Home > Fabrication Parts > Mandrel Bends > Stainless Steel 15° Mandrel Bend >

2.75" SS304 15° Mandrel Bend - 1.5D Radius - 16GA/.065" Wall - 6.5" Leg / 6.5" Leg
2.75" SS304 15° Mandrel Bend - 1.5D Radius - 16GA/.065" Wall - 6.5" Leg / 6.5" Leg
 

2.75" SS304 15° Mandrel Bend - 1.5D Radius - 16GA/.065" Wall - 6.5" Leg / 6.5" Leg

Stainless Bros 2.75" SS304 15° Mandrel Bends have been bent from our 16GA/.065" 304 Stainless Steel tubing. Each mandrel is individually bent, the ends are laser cut, the bend is then finished to a fine 180 Grit finish and they are ultrasonically cleaned to provide a ready to weld solution right out of the package.

Stainless Bros utilizes our own proprietary cnc mandrel bender and custom mandrel dies to provide a perfect bend every time that is both wrinkle and scratch free. Our mandrel bends will drastically reduce the fabrication time needed for producing a full Stainless Steel exhaust system when pie cuts become too time consuming.

Specifications:
Material:
304 Stainless Steel
Tubing Diameter: 2.75 Inch
Wall Thickness: 16GA/.065"
Bend Degree: 15°
Bend Radius: 1.5D / 4.125"
Leg Lengths: 6.5" / 6.5"
Quantity: Single Mandrel Bend
Part #:

List Price: $37.99


Product Code: 601-07016-8150
Qty:

 

Share your knowledge of this product. Be the first to write a review »